Raw mapped lun поиск

[CheBuRek]

Здравствуйте форумчане, подскажите есть ли какой либо быстрый способ посмотреть виртуальные машины с raw mapped lun в датацентре vsphere 5.5 ?

 

[kayne]

Помоему через консоль самый простой способ
https://kb.vmware.com/s/article/1005937
To list all virtual disks pointing to an RDM device using PowerCLI:
This operation is generally time-consuming, as PowerCLI must iteratively inquire about the disk type of every VMDK file on the remote hosts. Checking locked files adds a few seconds of delay. The device which the RDM points to cannot be determined without a virtual machine attached.
Open the vSphere PowerCLI command-line. For more information, see the vSphere PowerCLI Documentation.
Run the command:

  Get-Datastore | Get-HardDisk -DiskType "RawPhysical","RawVirtual" | Select "Filename","CapacityKB" | fl

Example output:

Filename : [DatastoreName] DirectoryName/virtualrdm.vmdk
CapacityKB : 5760

Note: The mapped device is not exposed, only the existence of the RDM. To determine the target device which it is mapped to, add this virtual disk to a virtual machine or use the console method.

 

[NanoSuit]

И еще можно используя локальную консоль, подрубившись по ssh к гипервизору