Goblin
Активный участник
Добрый день, есть NetApp FAS 2650 Array, новый. В нетапе не шарю вообще. Есть доступ через консоль serial.
Подскажите как сделать первоначальную настройку ? В консоли вижу такое:
И так без конца пока ctrl+c не нажмешь. Т.е она в циклической перезагрузке. Подскажите что делать и как туда софт поставить..
Подскажите как сделать первоначальную настройку ? В консоли вижу такое:
Код:
BIOS Version: 11.1
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.
Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...
CPU = 1 Processor(s) Detected.
Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (CPU 0)
CPUID: 0x00050663. Cores per Processor = 6
32768 MB System RAM Installed.
SATA (AHCI) Device: Micron_M600_MTFDDAT128MBF
Boot Loader version 6.0
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2016 NetApp, Inc. All Rights Reserved.
Starting AUTOBOOT press Ctrl-C to abort...
Loading X86_64/freebsd/image1/kernel:0x200000/13218168 0xe9b178/6411848 Entry at 0xffffffff802c5bc0
Loading X86_64/freebsd/image1/platform.ko:0x14b9000/2585024 0x17311c0/393792 0x1791400/543568
Starting program at 0xffffffff802c5bc0
NetApp Data ONTAP 9.2
ata2: AHCI reset done: devices=00000001
Copyright (C) 1992-2017 NetApp.
All rights reserved.
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
Wed Mar 20 09:26:20 2019 [nv2flash.restage.progress:NOTICE]: ReStage is not needed because the flash has no data.
Attempting to use existing varfs on /dev/nvrd1
Mar 20 09:26:40 Power outage protection flash de-staging: 26 cycles
vlan1: changing name to 'e0M-16'
***OS2SP configured successfully***Mar 20 09:27:06 [localhost:cf.ic.sbb:notice]: HA interconnect: SBB Compatibility Event. Compatible partner node found. The interconnect device has been enabled.
Mar 20 09:27:25 [localhost:config.noPartnerDisks:error]: No disks were detected for the partner; this node cannot perform takeover correctly.
Mar 20 09:27:25 [localhost:callhome.dsk.config:error]: Call home for DISK CONFIGURATION ERROR
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
AutoPartAFFDetermination: total_disks: 72 num_internal_disks: 12 num_ssds: 12 num_unknowns: 0 num_not_supported: 0 all_ssd? false
AutoPartDiskScan: CandidateDisks: 60 UsableDisks: 30 LocalDisks: 0 UnusableSSDs: 12 PartitionMethod: Root+Data
AutoPartDistributionCheck: LocalExpected: 12 PartnerExpected: 12 CandidateDisks: 60 LocalAssigned: 0 NotYetAssigned: 60
AutoPartRootConfig: root d+p+s=8+2+2, root aggr size=112958795 (blks) per 8 disks, root partition size=14127145 (blks)
AutoPartRequestedDiskAssignment: DiskMaxCount: 30 CksumType: block Pool: 0 RPM: 7200 DiskType: FSAS
AutoPartInfo: Disks may be from internal or external shelf
WARNING: 0 disks found!
Storage Adapters found:
0 Fibre Channel Storage Adapters found!
2 SAS Adapters found!
0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!
Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!
WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)
Uptime: 1m32s
System rebooting...
BIOS Version: 11.1
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.И так без конца пока ctrl+c не нажмешь. Т.е она в циклической перезагрузке. Подскажите что делать и как туда софт поставить..
