NetApp 2040 логин и пароль

Scampy

Почетный гость
Добрый день!
Достался в наследство NetApp 2040, но не знаю ни логина ни пароля.
Есть ли возможность как-то через консоль подключиться через стандартные? Ну или сбросить как-нибудь?
 
Добрый день!
Достался в наследство NetApp 2040, но не знаю ни логина ни пароля.
Есть ли возможность как-то через консоль подключиться через стандартные? Ну или сбросить как-нибудь?
default password (admin123) не подходит?
 
1. Connect a serial cable to one controller 1 and verify it was prompting for login prompt.
2. Power off both Power supplies
3. Power on one (or both Power supplies)
4. When Controller 1 says "Press Control C" to stop boot process (Or something like that.) then Press Control-C. This will take you to the "Loader-A" menu. (This is needed because you have to pause the bootup of this controller. Otherwise when you chose option 3 on Controller2, Controller 1 will be finished booting and controller 2 will hang at "Waiting for Giveback")
5. Now move your serial cable to the other Controller. (You have to do this quickly)
6. Wait until this controller says Press Control-C for Boot menu. -> then press Control-C
7. Then chose option 3 for "reset Password"
8. It will then think for a while and then give you an option to reset the password.
9. Then it wil finish booting this controller and prompt for login. Login with your new password.
 
1. Connect a serial cable to one controller 1 and verify it was prompting for login prompt.
2. Power off both Power supplies
3. Power on one (or both Power supplies)
4. When Controller 1 says "Press Control C" to stop boot process (Or something like that.) then Press Control-C. This will take you to the "Loader-A" menu. (This is needed because you have to pause the bootup of this controller. Otherwise when you chose option 3 on Controller2, Controller 1 will be finished booting and controller 2 will hang at "Waiting for Giveback")
5. Now move your serial cable to the other Controller. (You have to do this quickly)
6. Wait until this controller says Press Control-C for Boot menu. -> then press Control-C
7. Then chose option 3 for "reset Password"
8. It will then think for a while and then give you an option to reset the password.
9. Then it wil finish booting this controller and prompt for login. Login with your new password.
Все же выключать надо? Ой как хотелось бы этого избежать...
 
праздник сам себя не сделает. Хм.. а как еще можно кто знает ?:unsure:
 
Неужели не могли сделать какого-то стандартного неизменяемого логина и пароля который активен только при подключении из консоли...
 
Добрый день!
Достался в наследство NetApp 2040, но не знаю ни логина ни пароля.
Есть ли возможность как-то через консоль подключиться через стандартные? Ну или сбросить как-нибудь?
А данные то нужны там? А то factory reset и все как бы
 
Назад
Верх Низ