LIFs not at home

FlipFlop

Случайный прохожий
Здравствуйте! После выключения и включения схд netapp fas 2650 появилось предупреждение в ontap 9.5
 
Последнее редактирование модератором:
[h=1]Reverting a LIF to its home port[/h]
You can revert a LIF to its home port after it fails over or is migrated to a different port either manually or automatically. If the home port of a particular LIF is unavailable, the LIF remains at its current port and is not reverted. [h=2]About this task[/h]
  • If you administratively bring the home port of a LIF to the up state before setting the automatic revert option, the LIF is not returned to the home port.
  • The node-management LIF does not automatically revert unless the value of the auto revert option is set to true.
  • Cluster LIFs always revert to their home ports irrespective of the value of the auto revert option.
[h=2]Step[/h]
  1. Depending on whether you want to revert a LIF to its home port manually or automatically, perform one of the following steps:
    Manuallynetwork interface revert -vserver vserver_name -lif lif_name
    Automaticallynetwork interface modify -vserver vserver_name -lif lif_name -auto-revert true

    If you want to revert a LIF to its home port... Then enter the following command...

    vserver_name is the name of the Vserver.

    lif_name is the LIF name.
 
Спасибо, я сам уже разобрался - можно проще все сделать. Просто правой кнопкой мыши и обратно в home отправить... Спасибо.
 
Единственное что, не совсем ясно почему это произошло. Плюс ко всему после выключения / включения нетапа один контроллер не поднимается.
Node in an unhealthy state. Partial data might be displayed.
 

Вложения

  • photo775.png
    photo775.png
    31,7 КБ · Просмотры: 0
Назад
Верх Низ